Codes & Standards
CSA S37:24
Antennas, towers, and antenna-supporting structures
- English
- Published in 2024
- Published by CSA Group
- Subscription Available
Codes & Standards
CSA S900.1:18 (R2023)
Climate change adaptation for wastewater treatment plants
- English, French
- Published in 2018
- Reaffirmed in 2023
- Published by CSA Group
- Subscription Available
Codes & Standards
CSA S852:18 (R2023)
Blast-resistant window anchor systems
- English, French
- Published in 2018
- Reaffirmed in 2023
- Published by CSA Group
- Subscription Available
Codes & Standards - Purchase
IEC 62148-18:2014
Fiber optic active components and devices - Package and interface standards - Part 18: 40-Gbit/s serial transmitter and receiver components for use with the LC connector interface
- English, French
- Published in 2014
- Published by IEC
Codes & Standards
CSA ISO/IEC 2382-37:23
Information technology — Vocabulary — Part 37: Biometrics (Adopted ISO/IEC 2382-37:2022, third edition, 2022-03)
- English
- Published in 2023
- Published by CSA Group
- Subscription Available
Codes & Standards
CSA C22.2 NO. 60335-2-37:20
Household and similar electrical appliances — Safety — Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers (Adopted IEC 60335-2-37:2017, sixth edition, 2017-03, with Canadian deviations) | Appareils électrodomestiques et analogues — Sécurité — Partie 2-37 : Exigences particulières pour les friteuses et les friteuses à beignets électriques à usage collectif (norme IEC 60335-2-37:2017 adoptée, sixième édition, 2017-03, avec exigences propres au Canada)
- Bilingual
- Published in 2020
- Published by CSA Group
- Subscription Available
Codes & Standards
CSA C22.2 NO. 37:20
Deccorative lighting products
- English
- Published in 2020
- Published by CSA Group
- Subscription Available
Codes & Standards - Purchase
IEC 62047-37:2020
Semiconductor devices - Micro-electromechanical devices - Part 37: Environmental test methods of MEMS piezoelectric thin films for sensor application
- Bilingual
- Published in 2020
- Published by IEC
Codes & Standards
CSA C80079-37:22
Explosive atmospheres — Part 37: Non-electrical equipment for explosive atmospheres — Non electrical type of protection constructional safety "c", control of ignition source "b", liquid immersion "k" (Adopted ISO 80079-37:2016, first edition, 2016-02, with Canadian deviations) | Atmosphères explosives — Partie 37 : Appareils non électriques destinés à être utilisés en atmosphères explosives — Mode de protection non électrique par sécurité de construction « c », par contrôle de la source d’inflammation « b », par immersion dans un liquide « k » (norme ISO 80079-37:2016 adoptée, première édition, 2016-02, avec exigences propres au Canada)
- Bilingual
- Published in 2022
- Published by CSA Group
- Subscription Available
Codes & Standards - Purchase
ISO/IEC 2382-37:2022
Information technology — Vocabulary — Part 37: Biometrics
- English, French
- Published in 2022
- Published by ISO/IEC
Codes & Standards - Purchase
IEC 60749-37:2022
Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer
- Bilingual
- Published in 2022
- Published by IEC
Codes & Standards - Purchase
IWA 37-1:2022
Safety, security and sustainability of cannabis facilities and operations — Part 1: Requirements for the safety of cannabis buildings, equipment and oil extraction operations
- English
- Published in 2022
- Published by ISO
Codes & Standards - Purchase
IWA 37-2:2022
Safety, security and sustainability of cannabis facilities and operations — Part 2: Requirements for the secure handling of cannabis and cannabis products
- English
- Published in 2022
- Published by ISO
Codes & Standards - Purchase
IWA 37-3:2022
Safety, security and sustainability of cannabis facilities and operations — Part 3: Good production practices (GPP)
- English
- Published in 2022
- Published by ISO
Codes & Standards - Purchase
IEC 60749-37:2022 RLV
Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer
- English
- Published in 2022
- Published by IEC
Codes & Standards - Purchase
ISO 16000-37:2019
Indoor air — Part 37: Measurement of PM2,5 mass concentration
- English
- Published in 2019
- Published by ISO
Codes & Standards - Purchase
ISO 37:2017
Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- English, French
- Published in 2017
- Published by ISO
Codes & Standards - Purchase
IEC 60335-2-37:2017
Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers
- English, French
- Published in 2017
- Published by IEC
Codes & Standards - Purchase
IEC/IEEE 62271-37-013:2015/COR1:2017
Corrigendum 1 - High-voltage switchgear and controlgear - Part 37-013: Alternating-current generator circuit-breakers
- English
- Published in 2017
- Published by IEC/IEEE
Codes & Standards - Purchase
IEC 61300-2-37:2016
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures
- Bilingual
- Published in 2016
- Published by IEC
Codes & Standards - Purchase
ISO 80079-37:2016
Explosive atmospheres -- Part 37: Non-electrical equipment for explosive atmospheres -- Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k''
- Bilingual
- Published in 2016
- Published by ISO
Codes & Standards - Purchase
IEC/IEEE 62271-37-013:2015
High-voltage switchgear and controlgear - Part 37-013: Alternating-current generator circuit-breakers
- English
- Published in 2015
- Published by IEC/IEEE
Codes & Standards - Purchase
IEC 60601-2-37:2007+AMD1:2015 CSV
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
- Bilingual
- Published in 2015
- Published by IEC
Codes & Standards - Purchase
ISO/IEC 14496-5:2001/Amd 37:2015
Information technology -- Coding of audio-visual objects -- Part 5: Reference software -- Amendment 37: New levels for the AAC profiles, uniDRC support, AAC block length parameter corrections
- English
- Published in 2015
- Published by ISO/IEC
Codes & Standards - Purchase
IEC 60601-2-37:2007/AMD1:2015
Amendment 1 - Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
- Bilingual
- Published in 2015
- Published by IEC
Codes & Standards - Purchase
IEC/IEEE 62271-37-082:2012/COR1:2014
Corrigendum 1 - High-voltage switchgear and controlgear - Part 37-082: Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers
- English
- Published in 2014
- Published by IEC/IEEE
Codes & Standards - Purchase
IEC 60317-37:2013
Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer
- Bilingual
- Published in 2013
- Published by IEC
Codes & Standards - Purchase
IEC/IEEE 62271-37-082:2012
High-voltage switchgear and controlgear - Part 37-082: Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers
- English
- Published in 2012
- Published by IEC/IEEE
Codes & Standards
CSA/ANSI Z83.26:20/CSA 2.37:20
Gas-fired outdoor infrared patio heaters
- English
- Published in 2020
- Published by CSA Group
- Subscription Available
Codes & Standards - Purchase
ISO/IEC 14496-4:2004/Amd 37:2009
Information technology -- Coding of audio-visual objects -- Part 4: Conformance testing -- Amendment 37: Additional file format conformance
- English
- Published in 2009
- Published by ISO/IEC
Codes & Standards - Purchase
IEC 61249-2-37:2008
Materials for printed boards and other interconnecting structures - Part 2-37: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
- Bilingual
- Published in 2008
- Published by IEC
Codes & Standards - Purchase
IEC 60061-2:1969/AMD37:2008
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
- Bilingual
- Published in 2008
- Published by IEC
Codes & Standards - Purchase
IEC 61169-37:2007
Radio-frequency connectors - Part 37: Sectional specification - STWX8 R.F. connectors
- English, French
- Published in 2007
- Published by IEC
Codes & Standards - Purchase
IEC 60601-2-37:2007
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
- Bilingual
- Published in 2007
- Published by IEC
Codes & Standards - Purchase
IEC 60061-1:1969/AMD37:2006
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
- Bilingual
- Published in 2006
- Published by IEC
Codes & Standards - Purchase
IEC 60061-3:1969/AMD37:2006
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
- Bilingual
- Published in 2006
- Published by IEC
Codes & Standards - Purchase
IEC 61300-3-37:2005
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37: Examinations and measurements - Endface angle of angle-polished optical fibres
- Bilingual
- Published in 2005
- Published by IEC
Codes & Standards
CSA C22.2 NO. 60601-2-37A:08 (R2019)
Amendment 1:2019 to CAN/CSA-C22.2 NO. 60601-2-37-08, Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment (Adopted amendment 1:2015 to IEC 60601-2-37:2007) | Modification 1:2019 de CAN/CSA-C22.2 NO. 60601-2-37-08, Appareils électromédicaux - Partie 2-37: Exigences particulières pour la sécurité de base et les performances essentielles des appareils de diagnostic et de surveillance médicaux à ultrasons (amendement 1:2015 adoptée de la norme IEC 60601-2-37:2007)
- Bilingual
- Published in 2019
- Reaffirmed in 2019
- Published by CSA Group
Codes & Standards
CSA C22.2 NO. 60601-2-37:08 + A1:19 (R2019) (CONSOLIDATED)
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment (Adopted IEC 60601-2-37:2007, second edition, 2007-08, consolidated with amendment 1:2015, with Canadian deviations) | Appareils électromédicaux - Partie 2-37: Exigences particulières pour la sécurité de base et les performances essentielles des appareils de diagnostic et de surveillance médicaux à ultrasons (norme IEC 60601-2-37:2007 adoptée, deuxième édition, 2007-08, consolidée par amendement 1:2015, avec exigences propres au Canada)
- Bilingual
- Published in 2019
- Reaffirmed in 2019
- Published by CSA Group
Codes & Standards
CAN/CSA-ISO/IEC 14496-4:06/A37:10 (R2021)
Amendment 37:2010 to CAN/CSA-ISO/IEC 14496-4:06, Information Technology - Coding of Audio-Visual Objects - Part 4: Conformance Testing - Amendment 37: Additional file format conformance (Adopted Amendment 37:2009 to ISO/IEC 14496-4:2004)
- English
- Published in 2010
- Reaffirmed in 2021
- Published by CSA Group
Codes & Standards
CSA C22.2 NO. 60601-2-37:08 (R2019)
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment (Adopted IEC 60601-2-37:2007, second edition, 2007-08) | Appareils électromédicaux - Partie 2-37: Exigences particulières pour la sécurité de base et les performances essentielles des appareils de diagnostic et de surveillance médicaux à ultrasons (norme IEC 60601-2-37:2007 adoptée, deuxième édition, 2007-08)
- Bilingual
- Published in 2008
- Reaffirmed in 2019
- Published by CSA Group
- Subscription Available
Codes & Standards - Subscribe
C/C-ISO/IEC ISP 10609-37-99 (R2008)
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service Over Connection-Mode Network Service - Part 37: Definition of Profile TC43212 (Adopted ISO/IEC ISP 10609-37:1995, first edition, 1995-12-15)
- Published in 1999
- Reaffirmed in 2008
- Published by CSA Group
Codes & Standards - Purchase
IEC TR 61850-90-5:2012
Communication networks and systems for power utility automation - Part 90-5: Use of IEC 61850 to transmit synchrophasor information according to IEEE C37.118
- English
- Published in 2012
- Published by IEC
Codes & Standards - Purchase
ISO 29981:2010
Milk products -- Enumeration of presumptive bifidobacteria -- Colony count technique at 37 degrees C
- English
- Published in 2010
- Published by ISO
Codes & Standards - Purchase
ISO 12151-5:2007
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 5: Hose fittings with ISO 8434-2 37 degree flared ends
- English, French
- Published in 2007
- Published by ISO
Codes & Standards - Purchase
ISO 8434-2:2007
Metallic tube connections for fluid power and general use -- Part 2: 37 degree flared connectors
- English, French
- Published in 2007
- Published by ISO
Codes & Standards - Purchase
ISO 20128:2006
Milk products -- Enumeration of presumptive Lactobacillus acidophilus on a selective medium -- Colony-count technique at 37 degrees C
- English
- Published in 2006
- Published by ISO
Codes & Standards - Purchase
ISO 7889:2003
Yogurt -- Enumeration of characteristic microorganisms -- Colony-count technique at 37 degrees C
- English
- Published in 2003
- Published by ISO
Codes & Standards - Purchase
ISO 4902:1989
Information technology -- Data communication -- 37-pole DTE/DCE interface connector and contact number assignments
- English, French
- Published in 1989
- Published by ISO
Codes & Standards
CAN/CSA-ISO/IEC 14496-5AK-06
Amendment 37:2016 to CAN/CSA-ISO/IEC 14496-5-06, Information technology - Coding of audio-visual objects - Part 5: Reference software - Amendment 37: New levels for AAC profiles, uniDRC support, AAC block length parameter corrections (Adopted amendment 37:2015 to ISO/IEC 14496-5:2001)
- English
- Published in 2016
- Published by CSA Group
Codes & Standards
CSA C22.1:24
Canadian Electrical Code, Part I (26th Edition), Safety Standard for Electrical Installations
- English, French
- Published in 2024
- Published by CSA Group
- Subscription Available
- Available as CSA Advantage™
Codes & Standards
CSA S16:24
Design and construction of steel structures
- English
- Published in 2024
- Published by CSA Group
- Subscription Available
Codes & Standards
CSA S345:23
Design and construction of steel storage racks
- English, French
- Published in 2023
- Published by CSA Group
- Subscription Available
Codes & Standards
CSA S850:23
Design and assessment of buildings subjected to blast loads
- English, French
- Published in 2023
- Published by CSA Group
- Subscription Available
Codes & Standards
CSA S7:23
Pedestrian, cycling, and multiuse bridge design guideline
- English, French
- Published in 2023
- Published by CSA Group
- Subscription Available
Codes & Standards
CSA Z341S1:23
Supplement No. 1 to CSA Z341 SERIES:22, Storage of hydrocarbons in underground formations (application to hydrogen and hydrogen blends)
- English
- Published in 2023
- Published by CSA Group
Codes & Standards
CSA ISO 11737-1:19/A1:23
Amendment 1:2023 to CSA ISO 11737-1:19, Sterilization of health care products — Microbiological methods — Part 1: Determination of a population of microorganisms on products (Adopted amendment 1:2021 to ISO 11737-1:2018)
- English, French
- Published in 2023
- Published by CSA Group
Codes & Standards
CSA S502:21
Managing changing snow load risks for buildings in Canada's North
- English, French
- Published in 2021
- Published by CSA Group
- Subscription Available
Codes & Standards
CSA S501:21
Moderating the effects of permafrost degradation on existing building foundations
- English, French
- Published in 2021
- Published by CSA Group
- Subscription Available
Codes & Standards
CSA S500:21
Thermosyphon foundations for buildings in permafrost regions
- English, French
- Published in 2021
- Published by CSA Group
- Subscription Available