Codes & Standards - Purchase
ISO 297:1988
7/24 tapers for tool shanks for manual changing
- English, French
- Published in 1988
- Published by ISO
Codes & Standards - Purchase
ISO 266:1997
Acoustics -- Preferred frequencies
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 4095:1998
Aerospace -- Bihexagonal drives -- Wrenching configuration -- Metric series
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 12258:1998
Aerospace -- Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 275 MPa -- Dimensions
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 12274:1997
Aerospace -- Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degrees C -- Dimensions
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 12272:1998
Aerospace -- Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degrees C -- Dimensions
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 12268:1997
Aerospace -- Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/315 degrees C, 600 MPa (at ambient temperature)/650 degrees C, 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/730 degrees C and 1 100 MPa (at ambient temperature)/600 degrees C -- Dimensions
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 4147:1997
Aerospace -- Nuts, hexagonal, slotted (castellated), normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/730 degrees C, 1 250 MPa (at ambient temperature)/235 degrees C and 1 550 MPa (at ambient temperature)/600 degrees C -- Dimensions
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 12:1987
Aerospace -- Pipelines -- Identification
- English, French
- Published in 1987
- Published by ISO
Codes & Standards - Purchase
ISO 12281:1999
Aerospace -- Rivets, solid, 100 degrees normal countersunk head, in metallic material, with or without surface treatment -- Dimensions
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 4253:1993
Agricultural tractors -- Operator's seating accommodation -- Dimensions
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 789-11:1996
Agricultural tractors -- Test procedures -- Part 11: Steering capability of wheeled tractors
- English, French
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 11786:1995
Agricultural tractors and machinery -- Tractor-mounted sensor interface -- Specifications
- English, French
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 493:1975
Aircraft -- Dimensions for single-hole mounting (Class 1 and Class 2) lever-operated manual switches
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 530:1975
Aircraft -- General purpose push-pull single-pole circuit-breakers -- Dimensions
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 1034:1973
Aircraft -- Ground air-conditioning connections
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 11:1987
Aircraft -- Ground pressure testing connections for pressure cabins
- English, French
- Published in 1987
- Published by ISO
Codes & Standards - Purchase
ISO 413:1974
Aircraft -- Heads of lubricating nipples
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 268:1980
Aircraft -- Mechanical and electromechanical indicators -- General requirements
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 451:1976
Aircraft -- Pressure re-oiling connection
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 244:1979
Aircraft -- Sealing wire
- English, French
- Published in 1979
- Published by ISO
Codes & Standards - Purchase
ISO 6004:1991
Alpine skis -- Ski binding screws -- Requirements
- English, French
- Published in 1991
- Published by ISO
Codes & Standards - Purchase
ISO 1784:1976
Aluminium alloys -- Determination of zinc -- EDTA titrimetric method
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 793:1973
Aluminium and aluminium alloys -- Determination of iron -- Orthophenanthroline photometric method
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 808:1973
Aluminium and aluminium alloys -- Determination of silicon -- Spectrophotometric method with the reduced silicomolybdic complex
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 901:1976
Aluminium oxide primarily used for the production of aluminium -- Determination of absolute density -- Pyknometer method
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 902:1976
Aluminium oxide primarily used for the production of aluminium -- Measurement of the angle of repose
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 2073:1976
Aluminium oxide primarily used for the production of aluminium -- Preparation of solution for analysis -- Method by hydrochloric acid attack under pressure
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 4220:1983
Ambient air -- Determination of a gaseous acid air pollution index -- Titrimetric method with indicator or potentiometric end-point detection
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 2992:1974
Ammonium sulphate for industrial use -- Determination of iron content -- 2,2'- Bipyridyl photometric method
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 684:1974
Analysis of soaps -- Determination of total free alkali
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 1067:1974
Analysis of soaps -- Determination of unsaponifiable, unsaponified and unsaponified saponifiable matter
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 935:1988
Animal and vegetable fats and oils -- Determination of titre
- English, French
- Published in 1988
- Published by ISO
Codes & Standards - Purchase
ISO 2236:1991
Assembly tools for screws and nuts -- Forged and tubular socket wrenches -- Maximum outside head dimensions
- English, French
- Published in 1991
- Published by ISO
Codes & Standards - Purchase
ISO 6704:1982
Automatic steam traps -- Classification
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 2629:1973
Basic mode control procedures -- Conversational information message transfer
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 4184:1992
Belt drives -- Classical and narrow V-belts -- Lengths in datum system
- English, French
- Published in 1992
- Published by ISO
Codes & Standards - Purchase
ISO 22:1991
Belt drives -- Flat transmission belts and corresponding pulleys -- Dimensions and tolerances
- English, French
- Published in 1991
- Published by ISO
Codes & Standards - Purchase
ISO 6744-1:1999
Binders for paints and varnishes -- Alkyd resins -- Part 1: General methods of test
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 603-11:1999
Bonded abrasive products -- Dimensions -- Part 11: Hand finishing sticks
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 603-12:1999
Bonded abrasive products -- Dimensions -- Part 12: Grinding wheels for deburring and fettling on a straight grinder
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 603-2:1999
Bonded abrasive products -- Dimensions -- Part 2: Grinding wheels for centreless external cylindrical grinding
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 603-3:1999
Bonded abrasive products -- Dimensions -- Part 3: Grinding wheels for internal cylindrical grinding
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 3881:1977
Building construction -- Modular co-ordination -- Stairs and stair openings -- Co-ordinating dimensions
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 13002:1998
Carbon fibre -- Designation system for filament yarns
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 882-2:1993
Cardamom (Elettaria cardamomum (Linnaeus) Maton var. minuscula Burkill) -- Specification -- Part 2: Seeds
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 949:1987
Cauliflowers -- Guide to cold storage and refrigerated transport
- English, French
- Published in 1987
- Published by ISO
Codes & Standards - Purchase
ISO 3514:1976
Chlorinated polyvinyl chloride (CPVC) pipes and fittings -- Specification and determination of density
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 486:1988
Cinematography -- 16 mm motion-picture film perforated 8 mm Type R -- Cutting and perforating dimensions
- English, French
- Published in 1988
- Published by ISO
Codes & Standards - Purchase
ISO 3022:1988
Cinematography -- 35 mm motion-picture film perforated 16 mm (1-3-0) -- Cutting and perforating dimensions
- English, French
- Published in 1988
- Published by ISO
Codes & Standards - Purchase
ISO 70:1981
Cinematography -- 35 mm negative photographic sound record on 35 mm motion-picture film -- Position and maximum width dimensions
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 1700:1988
Cinematography -- 8 mm Type S motion-picture raw stock film -- Cutting and perforating dimensions
- English, French
- Published in 1988
- Published by ISO
Codes & Standards - Purchase
ISO 7831:1986
Cinematography -- A-chain frequency response for reproduction of 35 mm photographic sound -- Reproduction characteristics
- English, French
- Published in 1986
- Published by ISO
Codes & Standards - Purchase
ISO 28:1976
Cinematography -- Camera usage of 8 mm Type R motion-picture film -- Specifications
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 1787:1984
Cinematography -- Camera usage of 8 mm Type S motion-picture film -- Specifications
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 162:1985
Cinematography -- Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture -- Positions and width dimensions
- English, French
- Published in 1985
- Published by ISO
Codes & Standards - Purchase
ISO 4238:1976
Cinematography -- Optical printing ratios for enlargement and reduction of motion-picture film images -- Specifications
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 359:1983
Cinematography -- Projectable image area on 16 mm motion-picture prints -- Dimensions and location
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 26:1993
Cinematography -- Projector usage of 16 mm motion-picture films for direct front projection -- Specifications
- English
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 1188:1984
Cinematography -- Recorded characteristic for magnetic sound on full-coat 16 mm motion-picture film -- Specifications
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 4242:1980
Cinematography -- Recording head gaps for two sound records on 16 mm magnetic film -- Positions and width dimensions
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 2404:1986
Cinematography -- Six-track magnetic sound records on 70 mm striped release prints -- Locations and dimensions
- English, French
- Published in 1986
- Published by ISO
Codes & Standards - Purchase
ISO 3047:1982
Cinematography -- Spool, daylight loading type, for 35 mm motion-picture cameras (capacity 30 m - 100 ft) -- Dimensions
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 1019:1982
Cinematography -- Spools, daylight loading type for 16 mm motion-picture cameras -- Dimensions
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 10910:1995
Classification and designation of approximate chip control zones for indexable inserts with chipbreakers
- English, French
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 8232:1988
Closed-circuit dry-cleaning machines -- Defining and checking of machine characteristics
- English, French
- Published in 1988
- Published by ISO
Codes & Standards - Purchase
ISO 7803:1987
Commercial road vehicles -- Steering ball joints
- English, French
- Published in 1987
- Published by ISO
Codes & Standards - Purchase
ISO 2434:1973
Compressed non-breathing air for use in aircraft
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 3857-1:1977
Compressors, pneumatic tools and machines -- Vocabulary -- Part 1: General
- Bilingual
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 1029:1974
Coniferous sawn timber -- Defects -- Classification
- Trilingual
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 2784:1974
Continuous forms used for information processing -- Sizes and sprocket feed holes
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 1050:1975
Continuous mechanical handling equipment for loose bulk materials -- Screw conveyors
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 3265:1974
Continuous mechanical handling equipment for loose bulk materials -- Wagon tipplers handling rail-borne wagons (rotary, side discharge and end discharge) -- Safety code
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 1816:1975
Continuous mechanical handling equipment for loose bulk materials and unit loads -- Belt conveyors -- Basic characteristics of motorized driving pulleys
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 282:1992
Conveyor belts -- Sampling
- English, French
- Published in 1992
- Published by ISO
Codes & Standards - Purchase
ISO 3220:1975
Copper and copper alloys -- Determination of arsenic -- Photometric method
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 4741:1984
Copper and copper alloys -- Determination of phosphorus content -- Molybdovanadate spectrometric method
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 1811-2:1988
Copper and copper alloys -- Selection and preparation of samples for chemical analysis -- Part 2: Sampling of wrought products and castings
- English, French
- Published in 1988
- Published by ISO
Codes & Standards - Purchase
ISO 197-1:1983
Copper and copper alloys -- Terms and definitions -- Part 1: Materials
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 197-2:1983
Copper and copper alloys -- Terms and definitions -- Part 2: Unwrought products (Refinery shapes)
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 197-4:1983
Copper and copper alloys -- Terms and definitions -- Part 4: Castings
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 197-5:1980
Copper and copper alloys -- Terms and definitions -- Part 5: Methods of processing and treatment
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 2255:1996
Coriander (Coriandrum sativum L.), whole or ground (powdered) -- Specification
- English, French
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 11846:1995
Corrosion of metals and alloys -- Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
- English, French
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 7539-4:1989
Corrosion of metals and alloys -- Stress corrosion testing -- Part 4: Preparation and use of uniaxially loaded tension specimens
- English, French
- Published in 1989
- Published by ISO
Codes & Standards - Purchase
ISO 3038:1975
Corrugated fibreboard -- Determination of the water resistance of the glue bond by immersion
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 7797:1985
Cross-country skis -- Determination of breaking load and deflection at break with quasistatic load
- English, French
- Published in 1985
- Published by ISO
Codes & Standards - Purchase
ISO 1693:1976
Cryolite, natural and artificial -- Determination of fluorine content -- Modified Willard-Winter method
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 1694:1976
Cryolite, natural and artificial -- Determination of iron content -- 1,10- Phenanthroline photometric method
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 1620:1976
Cryolite, natural and artificial -- Determination of silica content -- Reduced molybdosilicate spectrophotometric method
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 3974:1977
Definitions of living animals for slaughter -- Ovines
- Bilingual
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 1741:1980
Dextrose -- Determination of loss in mass on drying -- Vacuum oven method
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 1730:1980
Dictation equipment -- Basic operating requirements
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 693:1982
Dimensions of seam welding wheel blanks
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 12650:1999
Document imaging applications -- Microfilming of achromatic maps on 35 mm microfilm
- English
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 5122:1979
Documentation -- Abstract sheets in serial publications
- English, French
- Published in 1979
- Published by ISO
Codes & Standards - Purchase
ISO 214:1976
Documentation -- Abstracts for publications and documentation
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 18:1981
Documentation -- Contents list of periodicals
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 215:1986
Documentation -- Presentation of contributions to periodicals and other serials
- English, French
- Published in 1986
- Published by ISO
Codes & Standards - Purchase
ISO 2256:1984
Dried mint (spearmint) (Mentha spicata Linnaeus syn. Mentha viridis Linnaeus) -- Specification
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 2306:1972
Drills for use prior to tapping screw threads
- English, French
- Published in 1972
- Published by ISO
Codes & Standards - Purchase
ISO 11862:1993
Earth-moving machinery -- Auxiliary starting aid electrical connector
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 12511:1997
Earth-moving machinery -- Hour meters
- English
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 6392-2:1996
Earth-moving machinery -- Lubrication fittings -- Part 2: Grease-gun nozzles
- English, French
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 2860:1992
Earth-moving machinery -- Minimum access dimensions
- English, French
- Published in 1992
- Published by ISO
Codes & Standards - Purchase
ISO 2361:1982
Electrodeposited nickel coatings on magnetic and non-magnetic substrates -- Measurement of coating thickness -- Magnetic method
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO/TR 12654:1997
Electronic imaging -- Recommendations for the management of electronic recording systems for the recording of documents that may be required as evidence, on WORM optical disk
- English
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 2179:1986
Electroplated coatings of tin-nickel alloy -- Specification and test methods
- English, French
- Published in 1986
- Published by ISO
Codes & Standards - Purchase
ISO 2678:1985
Environmental tests for aircraft equipment -- Insulation resistance and high voltage tests for electrical equipment
- English, French
- Published in 1985
- Published by ISO
Codes & Standards - Purchase
ISO 4197:1989
Equipment for working the soil -- Hoe blades -- Fixing dimensions
- English, French
- Published in 1989
- Published by ISO
Codes & Standards - Purchase
ISO 3794:1976
Essential oils (containing tertiary alcohols) -- Estimation of free alcohols content by determination of ester value after acetylation
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 1271:1983
Essential oils -- Determination of carbonyl value -- Free hydroxylamine method
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 1279:1996
Essential oils -- Determination of carbonyl value -- Potentiometric methods using hydroxylammonium chloride
- English, French
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 1241:1996
Essential oils -- Determination of ester values, before and after acetylation, and evaluation of the contents of free and total alcohols
- English, French
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 1041:1973
Essential oils -- Determination of freezing point
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 1388-10:1981
Ethanol for industrial use -- Methods of test -- Part 10: Estimation of hydrocarbons content -- Distillation method
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 1388-11:1981
Ethanol for industrial use -- Methods of test -- Part 11: Test for detection of furfural
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 1388-1:1981
Ethanol for industrial use -- Methods of test -- Part 1: General
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 1388-2:1981
Ethanol for industrial use -- Methods of test -- Part 2: Detection of alkalinity or determination of acidity to phenolphthalein
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 1388-8:1981
Ethanol for industrial use -- Methods of test -- Part 8: Determination of methanol content (methanol contents between 0,10 and 1,50 % (V/V)) -- Visual colorimetric method
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 1388-9:1981
Ethanol for industrial use -- Methods of test -- Part 9: Determination of esters content -- Titrimetric method after saponification
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 272:1982
Fasteners -- Hexagon products -- Widths across flats
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 4755:1983
Fasteners -- Thread undercuts for external metric ISO threads
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 7373:1987
Ferroalloys -- Experimental methods for checking the precision of sample division
- English, French
- Published in 1987
- Published by ISO
Codes & Standards - Purchase
ISO 4139:1979
Ferrosilicon -- Determination of aluminium content -- Flame atomic absorption spectrometric method
- English, French
- Published in 1979
- Published by ISO
Codes & Standards - Purchase
ISO 7497:1984
Fertilizers -- Extraction of phosphates soluble in mineral acids
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 7410:1983
Fertilizers and soil conditioners -- Final samples -- Practical arrangements
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 3340:1976
Fibre building boards -- Determination of sand content
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 234-1:1983
Files and rasps -- Part 1: Dimensions
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 234-2:1982
Files and rasps -- Part 2: Characteristics of cut
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 858:1973
Fishing nets -- Designation of netting yarns in the Tex System
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 6554:1980
Flanged automatic steam traps -- Face-to-face dimensions
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 1151-9:1993
Flight dynamics -- Concepts, quantities and symbols -- Part 9: Models of atmospheric motions along the trajectory of the aircraft
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 7918:1995
Forestry machinery -- Portable brush-cutters and grass-trimmers -- Cutting attachment guard dimensions
- English, French
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 874:1980
Fresh fruits and vegetables -- Sampling
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 3659:1977
Fruits and vegetables -- Ripening after cold storage
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 5517:1978
Fruits, vegetables and derived products -- Determination of iron content -- 1,10- Phenanthroline photometric method
- English, French
- Published in 1978
- Published by ISO
Codes & Standards - Purchase
ISO 6636-1:1986
Fruits, vegetables and derived products -- Determination of zinc content -- Part 1: Polarographic method
- English, French
- Published in 1986
- Published by ISO
Codes & Standards - Purchase
ISO 5521:1981
Fruits, vegetables and derived products -- Qualitative method for the detection of sulphur dioxide
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 32:1977
Gas cylinders for medical use -- Marking for identification of content
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 2046:1973
Gaseous breathing oxygen supplies for aircraft
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 787-10:1993
General methods of test for pigments and extenders -- Part 10: Determination of density -- Pyknometer method
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 787-1:1982
General methods of test for pigments and extenders -- Part 1: Comparison of colour of pigments
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 787-21:1979
General methods of test for pigments and extenders -- Part 21: Comparison of heat stability of pigments using a stoving medium
- English, French
- Published in 1979
- Published by ISO
Codes & Standards - Purchase
ISO 787-22:1980
General methods of test for pigments and extenders -- Part 22: Comparison of resistance to bleeding of pigments
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 695:1991
Glass -- Resistance to attack by a boiling aqueous solution of mixed alkali -- Method of test and classification
- English, French
- Published in 1991
- Published by ISO
Codes & Standards - Purchase
ISO 2096:1972
Glycerols for industrial use -- Methods of sampling
- English, French
- Published in 1972
- Published by ISO
Codes & Standards - Purchase
ISO 12040:1997
Graphic technology -- Prints and printing inks -- Assessment of light fastness using filtered xenon arc light
- English
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 710-1:1974
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 1: General rules of representation
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 710-3:1974
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 3: Representation of magmatic rocks
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 710-4:1982
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 4: Representation of metamorphic rocks
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 710-6:1984
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 6: Representation of contact rocks and rocks which have undergone metasomatic, pneumatolytic or hydrothermal transformation or transformation by weathering
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 5428:1984
Greek alphabet coded character set for bibliographic information interchange
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 931:1980
Green bananas -- Guide to storage and transport
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 7558:1988
Guide to the prepacking of fruits and vegetables
- English, French
- Published in 1988
- Published by ISO
Codes & Standards - Purchase
ISO 17:1973
Guide to the use of preferred numbers and of series of preferred numbers
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 3465:1975
Hand taper pin reamers
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 938:1975
Hand-operated stillage trucks -- Principal dimensions
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 3909:1976
Hardmetals -- Determination of cobalt -- Potentiometric method
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 4503:1978
Hardmetals -- Determination of contents of metallic elements by X-ray fluorescence -- Fusion method
- English, French
- Published in 1978
- Published by ISO
Codes & Standards - Purchase
ISO 4883:1978
Hardmetals -- Determination of contents of metallic elements by X-ray fluorescence -- Solution method
- English, French
- Published in 1978
- Published by ISO
Codes & Standards - Purchase
ISO 3738-1:1982
Hardmetals -- Rockwell hardness test (scale A) -- Part 1: Test method
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 2032:1973
Heat-resisting equipment wires for aircraft
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 2308:1972
Hooks for lifting freight containers of up to 30 tonnes capacity -- Basic requirements
- English, French
- Published in 1972
- Published by ISO
Codes & Standards - Purchase
ISO 1035-1:1980
Hot-rolled steel bars -- Part 1: Dimensions of round bars
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 1035-3:1980
Hot-rolled steel bars -- Part 3: Dimensions of flat bars
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 1035-4:1982
Hot-rolled steel bars -- Part 4: Tolerances
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 657-18:1980
Hot-rolled steel sections -- Part 18: L sections for shipbuilding (metric series) -- Dimensions, sectional properties and tolerances
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 657-1:1989
Hot-rolled steel sections -- Part 1: Equal-leg angles -- Dimensions
- English, French
- Published in 1989
- Published by ISO
Codes & Standards - Purchase
ISO 657-21:1983
Hot-rolled steel sections -- Part 21: T-sections with equal depth and flange width -- Dimensions
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 657-2:1989
Hot-rolled steel sections -- Part 2: Unequal-leg angles -- Dimensions
- English, French
- Published in 1989
- Published by ISO
Codes & Standards - Purchase
ISO 657-5:1976
Hot-rolled steel sections -- Part 5: Equal-leg angles and unequal-leg angles -- Tolerances for metric and inch series
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 3722:1976
Hydraulic fluid power -- Fluid sample containers -- Qualifying and controlling cleaning methods
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 261:1998
ISO general purpose metric screw threads -- General plan
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 965-5:1998
ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 263:1973
ISO inch screw threads -- General plan and selection for screws, bolts and nuts -- Diameter range 0,06 to 6 in
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 5838-3:1993
Implants for surgery -- Skeletal pins and wires -- Part 3: Kirschner skeletal wires
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 1756:1975
Industrial trucks -- Dimensions of stillages -- Connection gauge
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 10499-2:1998
Industrial tyres and rims -- Rubber solid tyres (metric series) for pneumatic tyre rims -- Part 2: Load ratings
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 832:1994
Information and documentation -- Bibliographic description and references -- Rules for the abbreviation of bibliographic terms
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 1086:1991
Information and documentation -- Title leaves of books
- English, French
- Published in 1991
- Published by ISO
Codes & Standards - Purchase
ISO 1177:1985
Information processing -- Character structure for start/stop and synchronous character oriented transmission
- English, French
- Published in 1985
- Published by ISO
Codes & Standards - Purchase
ISO 1858:1977
Information processing -- General purpose hubs and reels, with 76 mm (3 in) centrehole, for magnetic tape used in interchange instrumentation applications
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 1154:1975
Information processing -- Punched paper tape -- Dimensions and location of feed holes and code holes
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 1113:1979
Information processing -- Representation of the 7- bit coded character set on punched tape
- English, French
- Published in 1979
- Published by ISO
Codes & Standards - Purchase
ISO 1859:1973
Information processing -- Unrecorded magnetic tapes for interchange instrumentation applications -- General dimensional requirements
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 3726:1983
Instant coffee -- Determination of loss in mass at 70 degrees C under reduced pressure
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 2445:1972
Joints in building -- Fundamental principles for design
- English, French
- Published in 1972
- Published by ISO
Codes & Standards - Purchase
ISO 7377:1984
Juniper berries (Juniperus communis Linnaeus) -- Specification
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 1772:1975
Laboratory crucibles in porcelain and silica
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 641:1975
Laboratory glassware -- Interchangeable spherical ground joints
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 718:1990
Laboratory glassware -- Thermal shock and thermal shock endurance -- Test methods
- English, French
- Published in 1990
- Published by ISO
Codes & Standards - Purchase
ISO 5400:1984
Leather -- Determination of total silicon content -- Reduced molybdosilicate spectrometric method
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 2820:1974
Leather -- Raw hides of cattle and horses -- Method of trim
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 2374:1983
Lifting appliances -- Range of maximum capacities for basic models
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 2211:1973
Liquid chemical products -- Measurement of colour in Hazen units (platinum-cobalt scale)
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 758:1976
Liquid chemical products for industrial use -- Determination of density at 20 degrees C
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 2121:1972
Liquid chlorine for industrial use -- Determination of water content -- Gravimetric method
- English, French
- Published in 1972
- Published by ISO
Codes & Standards - Purchase
ISO 2209:1973
Liquid halogenated hydrocarbons for industrial use -- Sampling
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 6743-12:1989
Lubricants, industrial oils and related products (class L) -- Classification -- Part 12: Family Q (Heat transfer fluids)
- English, French
- Published in 1989
- Published by ISO
Codes & Standards - Purchase
ISO 299:1987
Machine tool tables -- T-slots and corresponding bolts
- English, French
- Published in 1987
- Published by ISO
Codes & Standards - Purchase
ISO 298:1973
Machine tools -- Lathe centres -- Sizes for interchangeability
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 229:1973
Machine tools -- Speeds and feeds
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 8016:1985
Machinery for agriculture -- Wheels with integral hub
- English, French
- Published in 1985
- Published by ISO
Codes & Standards - Purchase
ISO 2353:1972
Magnesium and its alloys -- Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and silver -- Periodate photometric method
- English, French
- Published in 1972
- Published by ISO
Codes & Standards - Purchase
ISO 3255:1974
Magnesium and magnesium alloys -- Determination of aluminium -- Chromazurol S photometric method
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 794:1976
Magnesium and magnesium alloys -- Determination of copper content -- Oxalyldihydrazide photometric method
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 792:1973
Magnesium and magnesium alloys -- Determination of iron -- Orthophenanthroline photometric method
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 809:1973
Magnesium and magnesium alloys -- Determination of manganese -- Periodate photometric method (Manganese content between 0,01 and 0,8 %)
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 810:1973
Magnesium and magnesium alloys -- Determination of manganese -- Periodate photometric method (Manganese content less than 0,01 %)
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 312:1986
Manganese ores -- Determination of active oxygen content, expressed as manganese dioxide -- Titrimetric method
- English, French
- Published in 1986
- Published by ISO
Codes & Standards - Purchase
ISO 619:1981
Manganese ores -- Determination of chromium content -- Diphenylcarbazide photometric method and silver persulphate titrimetric method
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 320:1981
Manganese ores -- Determination of sulphur content -- Barium sulphate gravimetric methods and sulphur dioxide titrimetric method after combustion
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 5889:1983
Manganese ores and concentrates -- Determination of aluminium, copper, lead and zinc contents -- Flame atomic absorption spectrometric method
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 315:1984
Manganese ores and concentrates -- Determination of nickel content -- Dimethylglyoxime spectrometric method and flame atomic absorption spectrometric method
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 1841-1:1996
Meat and meat products -- Determination of chloride content -- Part 1: Volhard method
- English, French
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 4543:1981
Metallic and other non-organic coatings -- General rules for corrosion tests applicable for storage conditions
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 12777-1:1994
Methods of test for pallet joints -- Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 2940-1:1974
Milling cutters mounted on centring arbors having a 7/24 taper -- Fitting dimensions -- Centring arbors
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 2940-2:1974
Milling cutters mounted on centring arbors having a 7/24 taper -- Inserted tooth cutters
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 839-2:1977
Milling machine arbors with 7/24 tapers -- Part 2: Accessories
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 2891:1977
Modular units for machine tool construction -- Centre bases and columns
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 2912:1973
Modular units for machine tool construction -- Multi-spindle heads -- Casing and input drive shaft dimensions
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 3590:1976
Modular units for machine tool construction -- Spindle units
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 2934:1973
Modular units for machine tool construction -- Wing base for columns
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 6054-1:1994
Motorcycle tyres and rims (Code-designated series) -- Diameter codes 4 to 12 -- Part 1: Tyres
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 1802:1992
Natural rubber latex concentrate -- Determination of boric acid content
- English, French
- Published in 1992
- Published by ISO
Codes & Standards - Purchase
ISO 498:1992
Natural rubber latex concentrate -- Preparation of dry films
- English, French
- Published in 1992
- Published by ISO
Codes & Standards - Purchase
ISO 3058:1998
Non-destructive testing -- Aids to visual inspection -- Selection of low-power magnifiers
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 3057:1998
Non-destructive testing -- Metallographic replica techniques of surface examination
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 4326:1980
Non-ionic surface active agents -- Polyethoxylated derivatives -- Determination of hydroxyl value -- Acetic anhydride method
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 2257:1980
Office machines and printing machines used for information processing -- Widths of fabric printing ribbons on spools
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 3142:1997
Oil of clove buds [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 735:1977
Oilseed residues -- Determination of ash insoluble in hydrochloric acid
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 729:1988
Oilseeds -- Determination of acidity of oils
- English, French
- Published in 1988
- Published by ISO
Codes & Standards - Purchase
ISO 11380:1994
Optics and optical instruments -- Ophthalmic optics -- Formers
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 2206:1987
Packaging -- Complete, filled transport packages -- Identification of parts when testing
- English, French
- Published in 1987
- Published by ISO
Codes & Standards - Purchase
ISO 8367-2:1993
Packaging -- Dimensional tolerances for general purpose sacks -- Part 2: Sacks made from thermoplastic flexible film
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 3856-1:1984
Paints and varnishes -- Determination of "soluble" metal content -- Part 1: Determination of lead content -- Flame atomic absorption spectrometric method and dithizone spectrophotometric method
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 3856-3:1984
Paints and varnishes -- Determination of "soluble" metal content -- Part 3: Determination of barium content -- Flame atomic emission spectrometric method
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 3270:1984
Paints and varnishes and their raw materials -- Temperatures and humidities for conditioning and testing
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 5630-1:1991
Paper and board -- Accelerated ageing -- Part 1: Dry heat treatment at 105 degrees C
- English, French
- Published in 1991
- Published by ISO
Codes & Standards - Purchase
ISO 11093-1:1994
Paper and board -- Testing of cores -- Part 1: Sampling
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 11093-3:1994
Paper and board -- Testing of cores -- Part 3: Determination of moisture content using the oven drying method
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 5661:1983
Petroleum products -- Hydrocarbon liquids -- Determination of refractive index
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 2997:1974
Phosphoric acid for industrial use -- Determination of sulphate content -- Method by reduction and titrimetry
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 2827:1988
Photography -- Electronic flash equipment -- Determination of light output and performance
- English, French
- Published in 1988
- Published by ISO
Codes & Standards - Purchase
ISO 1948:1987
Photography -- Front lens barrels up to 127 mm -- Dimensions important to the connection of auxiliaries
- English, French
- Published in 1987
- Published by ISO
Codes & Standards - Purchase
ISO 519:1992
Photography -- Hand-held cameras -- Flash-connector dimensions
- English, French
- Published in 1992
- Published by ISO
Codes & Standards - Purchase
ISO 1008:1992
Photography -- Paper dimensions -- Pictorial sheets
- English, French
- Published in 1992
- Published by ISO
Codes & Standards - Purchase
ISO 424:1994
Photography -- Processing chemicals -- Specifications for anhydrous sodium carbonate and sodium carbonate monohydrate
- English
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 423:1994
Photography -- Processing chemicals -- Specifications for hydroquinone
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 1755:1987
Photography -- Projector slides -- Dimensions
- English, French
- Published in 1987
- Published by ISO
Codes & Standards - Purchase
ISO 4385:1981
Plain bearings -- Compression testing of metallic bearing materials
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 7089:2000
Plain washers -- Normal series -- Product grade A
- English, French
- Published in 2000
- Published by ISO
Codes & Standards - Purchase
ISO 1598:1990
Plastics - Cellulose acetate -- Determination of insoluble particles
- English, French
- Published in 1990
- Published by ISO
Codes & Standards - Purchase
ISO 1600:1990
Plastics -- Cellulose acetate -- Determination of light absorption on moulded specimens produced using different periods of heating
- English, French
- Published in 1990
- Published by ISO
Codes & Standards - Purchase
ISO 3451-3:1984
Plastics -- Determination of ash -- Part 3: Unplasticized cellulose acetate
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 458-1:1985
Plastics -- Determination of stiffness in torsion of flexible materials -- Part 1: General method
- English, French
- Published in 1985
- Published by ISO
Codes & Standards - Purchase
ISO 458-2:1985
Plastics -- Determination of stiffness in torsion of flexible materials -- Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
- English, French
- Published in 1985
- Published by ISO
Codes & Standards - Purchase
ISO 182-1:1990
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 1: Congo red method
- English, French
- Published in 1990
- Published by ISO
Codes & Standards - Purchase
ISO 172:1978
Plastics -- Phenol-formaldehyde mouldings -- Detection of free ammonia
- English, French
- Published in 1978
- Published by ISO
Codes & Standards - Purchase
ISO 119:1977
Plastics -- Phenol-formaldehyde mouldings -- Determination of free phenols -- Iodometric method
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 1875:1982
Plastics -- Plasticized cellulose acetate -- Determination of matter extractable by diethyl ether
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 1622-2:1995
Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
- English, French
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 584:1982
Plastics -- Unsaturated polyester resins -- Determination of reactivity at 80 degrees C (conventional method)
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 12771:1997
Plastics laboratory ware -- Disposable serological pipettes
- English
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 2327:1972
Pneumatic handling appliances for loose bulk materials -- Piping
- English, French
- Published in 1972
- Published by ISO
Codes & Standards - Purchase
ISO 2466:1973
Potassium hydroxide for industrial use -- Sampling -- Test sample -- Preparation of the main solution for carrying out certain determinations
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 3:1973
Preferred numbers -- Series of preferred numbers
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 756-1:1981
Propan-2-ol for industrial use -- Methods of test -- Part 1: General
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 692:1982
Pulps -- Determination of alkali solubility
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 4119:1995
Pulps -- Determination of stock concentration
- English, French
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 528:1983
Refractory products -- Determination of pyrometric cone equivalent (refractoriness)
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 12678-1:1996
Refractory products -- Measurement of dimensions and external defects of refractory bricks -- Part 1: Dimensions and conformity to drawings
- English, French
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 12803:1997
Representative sampling of plutonium nitrate solutions for determination of plutonium concentration
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 5830:1984
Resistance spot welding -- Male electrode caps
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 4929:1978
Road vehicles -- Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid
- English, French
- Published in 1978
- Published by ISO
Codes & Standards - Purchase
ISO 3208:1974
Road vehicles -- Evaluation of protrusions inside passenger cars
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 4039-1:1998
Road vehicles -- Pneumatic braking systems -- Part 1: Pipes, male fittings and tapped holes with facial sealing surface
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 3895:1986
Road vehicles -- Screened and waterproof spark-plug and its connection -- Type 2
- English, French
- Published in 1986
- Published by ISO
Codes & Standards - Purchase
ISO 1721:1974
Rock drilling -- Extension drill-steel equipment for percussive long-hole drilling -- Reverse-buttress-threaded equipments 1 1/16 and 1 1/4 in (27 and 32 mm)
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 1717:1974
Rock drilling -- Rotary drill-rods and rotary drill-bits for dry drilling -- Connecting dimensions
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 1718:1991
Rock drilling equipment -- Drill rods with tapered connection for percussive drilling
- English, French
- Published in 1991
- Published by ISO
Codes & Standards - Purchase
ISO 723:1991
Rock drilling equipment -- Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels
- English, French
- Published in 1991
- Published by ISO
Codes & Standards - Purchase
ISO 722:1991
Rock drilling equipment -- Hollow drill steels in bar form, hexagonal and round
- English, French
- Published in 1991
- Published by ISO
Codes & Standards - Purchase
ISO 237:1975
Rotating tools with parallel shanks -- Diameters of shanks and sizes of driving squares
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 1124:1988
Rubber compounding ingredients -- Carbon black shipment sampling procedures
- English, French
- Published in 1988
- Published by ISO
Codes & Standards - Purchase
ISO 5473:1997
Rubber- or plastics-coated fabrics -- Determination of crush resistance
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 2299:1973
Sawn timber of broadleaved species -- Defects -- Classification
- Trilingual
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 1198:1972
Sealed-beam landing lamps for aircraft -- Dimensions
- English, French
- Published in 1972
- Published by ISO
Codes & Standards - Purchase
ISO 3591:1977
Sensory analysis -- Apparatus -- Wine-tasting glass
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 2402:1972
Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers
- English, French
- Published in 1972
- Published by ISO
Codes & Standards - Purchase
ISO 3674:1976
Shipbuilding -- Inland vessels -- Deck rail
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 4127-2:1980
Shipbuilding -- Inland vessels -- Fairleads -- Part 2: Roller fairleads
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 4051:1977
Shipbuilding -- Inland vessels -- Steering gear -- Values of torques
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 6765:1985
Shipbuilding -- Shipborne barges, series 3 -- Main dimensions
- English, French
- Published in 1985
- Published by ISO
Codes & Standards - Purchase
ISO 6766:1984
Shipbuilding -- Shipborne barges, series 4 -- Main dimensions
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 8146:1985
Shipbuilding and marine structures -- Oval eyeplates
- English, French
- Published in 1985
- Published by ISO
Codes & Standards - Purchase
ISO 4566:1992
Small craft with inboard engine -- Propeller shaft ends and bosses with 1:10 taper
- English, French
- Published in 1992
- Published by ISO
Codes & Standards - Purchase
ISO 457:1983
Soaps -- Determination of chloride content -- Titrimetric method
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 673:1981
Soaps -- Determination of content of ethanol-insoluble matter
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 1692:1976
Sodium and potassium silicates for industrial use -- Determination of total alkalinity -- Titrimetric method
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 1686:1976
Sodium and potassium silicates for industrial use -- Samples and methods of test -- General
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 746:1976
Sodium carbonate for industrial use -- Determination of matter insoluble in water at 50 degrees C
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 740:1976
Sodium carbonate for industrial use -- Determination of total soluble alkalinity -- Titrimetric method
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 739:1976
Sodium carbonate for industrial use -- Preparation and storage of test samples
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 3199:1975
Sodium chlorate for industrial use -- Determination of chlorate content -- Dichromate titrimetric method
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 2479:1972
Sodium chloride for industrial use -- Determination of matter insoluble in water or in acid and preparation of principal solutions for other determinations
- English, French
- Published in 1972
- Published by ISO
Codes & Standards - Purchase
ISO 2483:1973
Sodium chloride for industrial use -- Determination of the loss of mass at 110 degrees C
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 2833:1973
Sodium fluoride for industrial use -- Determination of fluorine content -- Modified Willard-Winter method
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 2832:1973
Sodium fluoride for industrial use -- Determination of moisture content
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 2831:1973
Sodium fluoride for industrial use -- Determination of water-insoluble matter
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 3430:1976
Sodium fluoride primarily used for the production of aluminium -- Determination of silica content -- Reduced molybdosilicate spectrophotometric method
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 4281:1977
Sodium hexafluorosilicate for industrial use -- Determination of free acidity and total hexafluorosilicate content -- Titrimetric method
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 981:1973
Sodium hydroxide for industrial use -- Determination of chloride content -- Mercurimetric method
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 979:1974
Sodium hydroxide for industrial use -- Method of assay
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 5327:1978
Solid wood paving blocks -- General characteristics
- English, French
- Published in 1978
- Published by ISO
Codes & Standards - Purchase
ISO 4228:1986
Spanners and wrenches -- Spline drive ends for power socket wrenches
- English, French
- Published in 1986
- Published by ISO
Codes & Standards - Purchase
ISO 522:1975
Special tolerances for reamers
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 1108:1992
Spices and condiments -- Determination of non-volatile ether extract
- English, French
- Published in 1992
- Published by ISO
Codes & Standards - Purchase
ISO 5822:1988
Spot welding equipment -- Taper plug gauges and taper ring gauges
- English, French
- Published in 1988
- Published by ISO
Codes & Standards - Purchase
ISO 554:1976
Standard atmospheres for conditioning and/or testing -- Specifications
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 5378:1978
Starches and derived products -- Determination of nitrogen content by the Kjeldahl method -- Spectrophotometric method
- English, French
- Published in 1978
- Published by ISO
Codes & Standards - Purchase
ISO 3188:1978
Starches and derived products -- Determination of nitrogen content by the Kjeldahl method -- Titrimetric method
- English, French
- Published in 1978
- Published by ISO
Codes & Standards - Purchase
ISO 5809:1982
Starches and derived products -- Determination of sulphated ash
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 3946:1982
Starches and derived products -- Determination of total phosphorus content -- Spectrophotometric method
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 629:1982
Steel and cast iron -- Determination of manganese content -- Spectrophotometric method
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 2605-3:1985
Steel products for pressure purposes -- Derivation and verification of elevated temperature properties -- Part 3: An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
- English, French
- Published in 1985
- Published by ISO
Codes & Standards - Purchase
ISO 3545-2:1989
Steel tubes and fittings -- Symbols for use in specifications -- Part 2: Square and rectangular hollow sections
- English, French
- Published in 1989
- Published by ISO
Codes & Standards - Purchase
ISO 4948-1:1982
Steels -- Classification -- Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 677:1976
Straight bevel gears for general engineering and heavy engineering -- Basic rack
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 678:1976
Straight bevel gears for general engineering and heavy engineering -- Modules and diametral pitches
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 3156:1976
Stranded wire ropes for mine hoisting -- Impregnating compounds, lubricants and service dressings -- Characteristics and tests
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 2040:1972
Strontium chromate pigments for paints
- English, French
- Published in 1972
- Published by ISO
Codes & Standards - Purchase
ISO 3705:1976
Sulphur for industrial use -- Determination of arsenic content -- Silver diethyldithiocarbamate photometric method
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 3425:1975
Sulphur for industrial use -- Determination of ash at 850-900 degrees C and of residue at 200 degrees C
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 2268:1972
Surface active agents (non-ionic) -- Determination of polyethylene glycols and non-ionic active matter (adducts) -- Weibull method
- English, French
- Published in 1972
- Published by ISO
Codes & Standards - Purchase
ISO 456:1973
Surface active agents -- Analysis of soaps -- Determination of free caustic alkali
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 2131:1972
Surface active agents -- Simplified classification
- English, French
- Published in 1972
- Published by ISO
Codes & Standards - Purchase
ISO 2272:1989
Surface active agents -- Soaps -- Determination of low contents of free glycerol by molecular absorption spectrometry
- English, French
- Published in 1989
- Published by ISO
Codes & Standards - Purchase
ISO 893:1989
Surface active agents -- Technical alkane sulfonates -- Methods of analysis
- English, French
- Published in 1989
- Published by ISO
Codes & Standards - Purchase
ISO 895:1977
Surface active agents -- Technical sodium secondary alkylsulphates -- Methods of analysis
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 697:1981
Surface active agents -- Washing powders -- Determination of apparent density -- Method by measuring the mass of a given volume
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 2339:1986
Taper pins, unhardened
- English, French
- Published in 1986
- Published by ISO
Codes & Standards - Purchase
ISO 1575:1987
Tea -- Determination of total ash
- English, French
- Published in 1987
- Published by ISO
Codes & Standards - Purchase
ISO 1572:1980
Tea -- Preparation of ground sample of known dry matter content
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 3103:1980
Tea -- Preparation of liquor for use in sensory tests
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 5455:1979
Technical drawings -- Scales
- English, French
- Published in 1979
- Published by ISO
Codes & Standards - Purchase
ISO 2550:1972
Textile floor coverings -- Hand-made carpets -- Determination of types of knots
- English, French
- Published in 1972
- Published by ISO
Codes & Standards - Purchase
ISO 3018:1974
Textile floor coverings -- Rectangular textile floor coverings -- Determination of dimensions
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 109:1982
Textile machinery -- Working widths of weaving machines
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 3914-7:1994
Textile machinery and accessories -- Cylindrical tubes -- Part 7: Dimensions, tolerances and designation of perforated tubes for cheese dyeing
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 1150:1997
Textile machinery and accessories -- Drop wires for warp stop motions for weaving machines with automatic drawing-in
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 10787-3:1994
Textile machinery and accessories -- Heald frames -- Part 3: Guides for heald frames
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 141:1976
Textile machinery and accessories -- Pirn winders and cross winders -- Definition of left and right sides
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 365:1982
Textile machinery and accessories -- Twin wire healds with inset mail for Jacquard weaving
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 1809:1977
Textile machinery and accessories -- Types of formers for yarn packages -- Nomenclature
- Trilingual
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 142:1976
Textile machinery and accessories -- Weaving preparatory machines -- Definition of left and right sides
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 4105:1978
Textile machinery and accessories -- Wires for flexible card clothings
- English, French
- Published in 1978
- Published by ISO
Codes & Standards - Purchase
ISO 2:1973
Textiles -- Designation of the direction of twist in yarns and related products
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 3005:1978
Textiles -- Determination of dimensional change of fabrics induced by free-steam
- English, French
- Published in 1978
- Published by ISO
Codes & Standards - Purchase
ISO 3998:1977
Textiles -- Determination of resistance to certain insect pests
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 6741-3:1987
Textiles -- Fibres and yarns -- Determination of commercial mass of consignments -- Part 3: Specimen cleaning procedures
- English, French
- Published in 1987
- Published by ISO
Codes & Standards - Purchase
ISO 105-A04:1989
Textiles -- Tests for colour fastness -- Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
- English, French
- Published in 1989
- Published by ISO
Codes & Standards - Purchase
ISO 105-A06:1995
Textiles -- Tests for colour fastness -- Part A06: Instrumental determination of 1/1 standard depth of colour
- English, French
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 105-N01:1993
Textiles -- Tests for colour fastness -- Part N01: Colour fastness to bleaching: Hypochlorite
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 105-N02:1993
Textiles -- Tests for colour fastness -- Part N02: Colour fastness to bleaching: Peroxide
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 105-N03:1993
Textiles -- Tests for colour fastness -- Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 105-N04:1993
Textiles -- Tests for colour fastness -- Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 105-N05:1993
Textiles -- Tests for colour fastness -- Part N05: Colour fastness to stoving
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 105-P01:1993
Textiles -- Tests for colour fastness -- Part P01: Colour fastness to dry heat (excluding pressing)
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 105-S03:1993
Textiles -- Tests for colour fastness -- Part S03: Colour fastness to vulcanization: Open steam
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 105-Z01:1993
Textiles -- Tests for colour fastness -- Part Z01: Colour fastness to metals in the dye-bath: Chromium salts
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 105-Z02:1993
Textiles -- Tests for colour fastness -- Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 105-Z03:1996
Textiles -- Tests for colour fastness -- Part Z03: Intercompatibility of basic dyes for acrylic fibres
- English, French
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 105-Z04:1995
Textiles -- Tests for colour fastness -- Part Z04: Dispersibility of disperse dyes
- English, French
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 105-Z07:1995
Textiles -- Tests for colour fastness -- Part Z07: Determination of application solubility and solution stability of water-soluble dyes
- English, French
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 105-Z08:1995
Textiles -- Tests for colour fastness -- Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
- English, French
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 105-Z09:1995
Textiles -- Tests for colour fastness -- Part Z09: Determination of cold water solubility of water-soluble dyes
- English, French
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 7211-4:1984
Textiles -- Woven fabrics -- Construction -- Methods of analysis -- Part 4: Determination of twist in yarn removed from fabric
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 3801:1977
Textiles -- Woven fabrics -- Determination of mass per unit length and mass per unit area
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 3158:1976
Timekeeping instruments -- Symbolization of control positions
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 3765:1998
Timekeeping instruments -- Wristwatches -- Dimensions of bracelet-to-case fastening elements
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 4876:1980
Tobacco and tobacco products -- Determination of maleic hydrazide residues
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 3443-8:1989
Tolerances for building -- Part 8: Dimensional inspection and control of construction work
- English, French
- Published in 1989
- Published by ISO
Codes & Standards - Purchase
ISO 5272:1979
Toluene for industrial use -- Specifications
- English, French
- Published in 1979
- Published by ISO
Codes & Standards - Purchase
ISO 10889-8:1997
Tool holders with cylindrical shank -- Part 8: Type Z, accessories
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 3114:1977
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply -- Extractability of lead and tin -- Test method
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 1608-1:1993
Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 3634:1979
Vegetable products -- Determination of chloride content
- English, French
- Published in 1979
- Published by ISO
Codes & Standards - Purchase
ISO 6370-1:1991
Vitreous and porcelain enamels -- Determination of the resistance to abrasion -- Part 1: Abrasion testing apparatus
- English, French
- Published in 1991
- Published by ISO
Codes & Standards - Purchase
ISO 2747:1998
Vitreous and porcelain enamels -- Enamelled cooking utensils -- Determination of resistance to thermal shock
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 4321:1977
Washing powders -- Determination of active oxygen content -- Titrimetric method
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 2913:1975
Wool -- Colorimetric determination of cystine plus cysteine in hydrolysates
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 2916:1975
Wool -- Determination of alkali content
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 2646:1974
Wool -- Measurement of the length of fibres processed on the worsted system, using a fibre diagram machine
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 4739:1985
Wrought copper and copper alloy products -- Selection and preparation of specimens and test pieces for mechanical testing
- English, French
- Published in 1985
- Published by ISO
Codes & Standards - Purchase
ISO 2923:1996
Acoustics -- Measurement of noise on board vessels
- English, French
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 389-2:1994
Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 12290:2000
Aerospace -- Rivets, solid, in titanium or titanium alloy -- Procurement specification
- English, French
- Published in 2000
- Published by ISO
Codes & Standards - Purchase
ISO 12374:1995
Agricultural irrigation -- Wiring and equipment for electrically driven or controlled irrigation machines
- English
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 789-7:1991
Agricultural tractors -- Test procedures -- Part 7: Axle power determination
- English, French
- Published in 1991
- Published by ISO
Codes & Standards - Purchase
ISO 8058:1999
Air cargo -- Insulated container -- Thermal efficiency requirements
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 8268:1987
Air cargo equipment -- Automobile transport devices -- Basic requirements
- English, French
- Published in 1987
- Published by ISO
Codes & Standards - Purchase
ISO 4221:1980
Air quality -- Determination of mass concentration of sulphur dioxide in ambient air -- Thorin spectrophotometric method
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 3174:1994
Aircraft -- Connections for checking hydraulic systems by ground appliances -- Threaded type
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 2574:1994
Aircraft -- Electrical cables -- Identification marking
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 1949:1987
Aircraft -- Electrical connectors -- Design requirements
- English, French
- Published in 1987
- Published by ISO
Codes & Standards - Purchase
ISO 2156:1974
Aircraft -- Fire-resisting electrical cables -- Methods of test
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 5066-2:1986
Aircraft -- Hermetically sealed monostable electrical relays, 2A and 3A -- Part 2: Type approval tests
- English, French
- Published in 1986
- Published by ISO
Codes & Standards - Purchase
ISO 5065-2:1986
Aircraft -- Magnetic indicators -- Part 2: Tests
- English, French
- Published in 1986
- Published by ISO
Codes & Standards - Purchase
ISO 485:1973
Aircraft water-methanol pressure connections
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 6655:1997
Animal feeding stuffs -- Determination of soluble nitrogen content after treatment with pepsin in dilute hydrochloric acid
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 2628:1973
Basic mode control procedures -- Complements
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 11843-1:1997
Capability of detection -- Part 1: Terms and definitions
- Bilingual
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 2016:1981
Capillary solder fittings for copper tubes -- Assembly dimensions and tests
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 882-1:1993
Cardamom (Elettaria cardamomum (Linnaeus) Maton var. minuscula Burkill) -- Specification -- Part 1: Whole capsules
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 3550-1:1997
Cigarettes -- Determination of loss of tobacco from the ends -- Part 1: Method using a rotating cylindrical cage
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 12606:1997
Cinematography -- Care and preservation of magnetic audio recordings for motion pictures and television
- English
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 11782-1:1998
Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 1: Cycles to failure testing
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 12478-1:1997
Cranes -- Maintenance manual -- Part 1: General
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 1966:1973
Crimped joints for aircraft electrical cables
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 760:1978
Determination of water -- Karl Fischer method (General method)
- English, French
- Published in 1978
- Published by ISO
Codes & Standards - Purchase
ISO 259:1984
Documentation -- Transliteration of Hebrew characters into Latin characters
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 4510-1:1987
Earth-moving machinery -- Service tools -- Part 1: Common maintenance and adjustment tools
- English, French
- Published in 1987
- Published by ISO
Codes & Standards - Purchase
ISO 3069:2000
End-suction centrifugal pumps -- Dimensions of cavities for mechanical seals and for soft packing
- English, French
- Published in 2000
- Published by ISO
Codes & Standards - Purchase
ISO 6157-2:1995
Fasteners -- Surface discontinuities -- Part 2: Nuts
- English, French
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 3582:2000
Flexible cellular polymeric materials -- Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
- English, French
- Published in 2000
- Published by ISO
Codes & Standards - Purchase
ISO 1151-3:1989
Flight dynamics -- Concepts, quantities and symbols -- Part 3: Derivatives of forces, moments and their coefficients
- English, French
- Published in 1989
- Published by ISO
Codes & Standards - Purchase
ISO 1151-5:1987
Flight dynamics -- Concepts, quantities and symbols -- Part 5: Quantities used in measurements
- English, French
- Published in 1987
- Published by ISO
Codes & Standards - Purchase
ISO 1151-4:1994
Flight dynamics -- Concepts, quantities, and symbols -- Part 4: Concepts and quantities used in the study of aircraft stability and control
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 12644:1996
Graphic technology -- Determination of rheological properties of paste inks and vehicles by the falling rod viscometer
- English
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 12645:1998
Graphic technology -- Process control -- Certified reference material for opaque area calibration of transmission densitometers
- English
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 710-2:1974
Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 2: Representation of sedimentary rocks
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 497:1973
Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 12775:1997
Guidelines on types of glass of normal bulk-production composition and their test methods
- English
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 2568:1988
Hand- and machine-operated circular screwing dies and hand-operated die stocks
- English, French
- Published in 1988
- Published by ISO
Codes & Standards - Purchase
ISO 3512:1992
Heavy-duty cranked-link transmission chains
- English, French
- Published in 1992
- Published by ISO
Codes & Standards - Purchase
ISO 4951-1:2001
High yield strength steel bars and sections -- Part 1: General delivery requirements
- English, French
- Published in 2001
- Published by ISO
Codes & Standards - Purchase
ISO 12570:2000
Hygrothermal performance of building materials and products -- Determination of moisture content by drying at elevated temperature
- English, French
- Published in 2000
- Published by ISO
Codes & Standards - Purchase
ISO 5835:1991
Implants for surgery -- Metal bone screws with hexagonal drive connection, spherical under-surface of head, asymmetrical thread -- Dimensions
- English, French
- Published in 1991
- Published by ISO
Codes & Standards - Purchase
ISO 3873:1977
Industrial safety helmets
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 843:1997
Information and documentation -- Conversion of Greek characters into Latin characters
- English
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 11822:1996
Information and documentation -- Extension of the Arabic alphabet coded character set for bibliographic information interchange
- English
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 4:1997
Information and documentation -- Rules for the abbreviation of title words and titles of publications
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 1681:1973
Information processing -- Unpunched paper cards -- Specification
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 2598-2:1992
Iron ores -- Determination of silicon content -- Part 2: Reduced molybdosilicate spectrophotometric method
- English, French
- Published in 1992
- Published by ISO
Codes & Standards - Purchase
ISO 10887:1999
Key type three-jaw drill chucks -- Specification
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 10888:1999
Keyless type three-jaw drill chucks -- Specification
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 3711:1990
Lead chromate pigments and lead chromate-molybdate pigments -- Specifications and methods of test
- English, French
- Published in 1990
- Published by ISO
Codes & Standards - Purchase
ISO 1466:1973
Lever-operated manual switches for aircraft -- Performance requirements
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 3837:1993
Liquid petroleum products -- Determination of hydrocarbon types -- Fluorescent indicator adsorption method
- English
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 2975-2:1975
Measurement of water flow in closed conduits -- Tracer methods -- Part 2: Constant rate injection method using non-radioactive tracers
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 2975-3:1976
Measurement of water flow in closed conduits -- Tracer methods -- Part 3: Constant rate injection method using radioactive tracers
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 10816-6:1995
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 6: Reciprocating machines with power ratings above 100 kW
- English, French
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 12687:1996
Metallic coatings -- Porosity tests -- Humid sulfur (flowers of sulfur) test
- English, French
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 3056:1986
Non-calibrated round steel link lifting chain and chain slings -- Use and maintenance
- English, French
- Published in 1986
- Published by ISO
Codes & Standards - Purchase
ISO 5626:1993
Paper -- Determination of folding endurance
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 6247:1998
Petroleum products -- Determination of foaming characteristics of lubricating oils
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 3014:1993
Petroleum products -- Determination of the smoke point of kerosine
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 3734:1997
Petroleum products -- Determination of water and sediment in residual fuel oils -- Centrifuge method
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 5799:1991
Photography -- Direct-exposing medical and dental radiographic film/process systems -- Determination of ISO speed and ISO average gradient
- English, French
- Published in 1991
- Published by ISO
Codes & Standards - Purchase
ISO 11315-1:1997
Photography -- Projection in indoor rooms -- Part 1: Screen illumination test for still projectors
- English
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 3305:1985
Plain end welded precision steel tubes -- Technical conditions for delivery
- English, French
- Published in 1985
- Published by ISO
Codes & Standards - Purchase
ISO 887:2000
Plain washers for metric bolts, screws and nuts for general purposes -- General plan
- English, French
- Published in 2000
- Published by ISO
Codes & Standards - Purchase
ISO 3672-2:2000
Plastics -- Unsaturated-polyester resins (UP-R) -- Part 2: Preparation of test specimens and determination of properties
- English, French
- Published in 2000
- Published by ISO
Codes & Standards - Purchase
ISO 3511-2:1984
Process measurement control functions and instrumentation -- Symbolic representation -- Part 2: Extension of basic requirements
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 801-1:1994
Pulps -- Determination of saleable mass in lots -- Part 1: Pulp baled in sheet form
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 801-3:1994
Pulps -- Determination of saleable mass in lots -- Part 3: Unitized bales
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 6305-4:1985
Railway components -- Technical delivery requirements -- Part 4: Untreated steel nuts and bolts and high-strength nuts and bolts for fish-plates and fastenings
- English, French
- Published in 1985
- Published by ISO
Codes & Standards - Purchase
ISO 1005-3:1982
Railway rolling stock material -- Part 3: Axles for tractive and trailing stock -- Quality requirements
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 1005-4:1986
Railway rolling stock material -- Part 4: Rolled or forged wheel centres for tyred wheels for tractive and trailing stock -- Quality requirements
- English, French
- Published in 1986
- Published by ISO
Codes & Standards - Purchase
ISO 1005-8:1986
Railway rolling stock material -- Part 8: Solid wheels for tractive and trailing stock -- Dimensional and balancing requirements
- English, French
- Published in 1986
- Published by ISO
Codes & Standards - Purchase
ISO 3187:1989
Refractory products -- Determination of creep in compression
- English, French
- Published in 1989
- Published by ISO
Codes & Standards - Purchase
ISO 6813:1998
Road vehicles -- Collision classification -- Terminology
- Bilingual
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 1176:1990
Road vehicles -- Masses -- Vocabulary and codes
- Bilingual
- Published in 1990
- Published by ISO
Codes & Standards - Purchase
ISO 4082:1981
Road vehicles -- Motor vehicles -- Flasher units
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 7965-2:1993
Sacks -- Drop test -- Part 2: Sacks made from thermoplastic flexible film
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 7928-2:1991
Savory -- Specification -- Part 2: Summer savory (Satureja hortensis Linnaeus)
- English, French
- Published in 1991
- Published by ISO
Codes & Standards - Purchase
ISO 2301:1973
Sawn timber of broadleaved species -- Defects -- Measurement
- Trilingual
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 1180:1983
Shanks for pneumatic tools and fitting dimensions of chuck bushings
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 3969:1979
Shipbuilding -- Inland vessels -- Operational documentation
- English, French
- Published in 1979
- Published by ISO
Codes & Standards - Purchase
ISO 13261-1:1998
Sound power rating of air-conditioning and air-source heat pump equipment -- Part 1: Non-ducted outdoor equipment
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 1127:1992
Stainless steel tubes -- Dimensions, tolerances and conventional masses per unit length
- English, French
- Published in 1992
- Published by ISO
Codes & Standards - Purchase
ISO 14:1982
Straight-sided splines for cylindrical shafts with internal centering -- Dimensions, tolerances and verification
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 894:1977
Surface active agents -- Technical sodium primary alkylsulphates -- Methods of analysis
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 607:1980
Surface active agents and detergents -- Methods of sample division
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 2162-2:1993
Technical product documentation -- Springs -- Part 2: Presentation of data for cylindrical helical compression springs
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 3190:1975
Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle -- Testing of the accuracy
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 3341:2000
Textile glass -- Yarns -- Determination of breaking force and breaking elongation
- English, French
- Published in 2000
- Published by ISO
Codes & Standards - Purchase
ISO 2012:1976
Textile machinery and accessories -- Cone sectional warping machines -- Maximum usable width
- English, French
- Published in 1976
- Published by ISO
Codes & Standards - Purchase
ISO 2205:1975
Textile machinery and accessories -- Drafting arrangements for spinning machines -- Terminology
- Trilingual
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 10787-1:1994
Textile machinery and accessories -- Heald frames -- Part 1: Heald-carrying rod fixed to the frame stave by rod support -- Coordinated dimensions
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 10787-2:1994
Textile machinery and accessories -- Heald frames -- Part 2: Heald-carrying rod fixed directly on the frame stave -- Coordinated dimensions
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 1865:1977
Textile machinery and accessories -- Serrated bars for mechanical warp stop motions -- Designations of dimensions, and dimensions of cross-section
- Trilingual
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 1586:1977
Textile machinery and accessories -- Shuttles -- Terms and designation in relation to the position of the shuttle eye
- Trilingual
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 4912:1981
Textiles -- Cotton fibres -- Evaluation of maturity -- Microscopic method
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 12947-1:1998
Textiles -- Determination of the abrasion resistance of fabrics by the Martindale method -- Part 1: Martindale abrasion testing apparatus
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 105-Z05:1996
Textiles -- Tests for colour fastness -- Part Z05: Determination of the dusting behaviour of dyes
- English, French
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 105-Z06:1998
Textiles -- Tests for colour fastness -- Part Z06: Evaluation of dye and pigment migration
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 3443-3:1987
Tolerances for building -- Part 3: Procedures for selecting target size and predicting fit
- English, French
- Published in 1987
- Published by ISO
Codes & Standards - Purchase
ISO 918:1983
Volatile organic liquids for industrial use -- Determination of distillation characteristics
- English, French
- Published in 1983
- Published by ISO
Codes & Standards - Purchase
ISO 2729:1995
Woodworking tools -- Chisels and gouges
- English, French
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 1249:1974
Zinc chromate pigments -- Basic zinc potassium chromate pigments and zinc tetrahydroxychromate pigments
- English, French
- Published in 1974
- Published by ISO
Codes & Standards - Purchase
ISO 259-2:1994
no title -- Part 2: Simplified transliteration
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO/IEC 646:1991
Information technology -- ISO 7-bit coded character set for information interchange
- English
- Published in 1991
- Published by ISO/IEC
Codes & Standards - Purchase
ISO/IEC 1864:1992
Information technology -- Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange -- 32 ftpmm (800 ftpi), NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi), NRZ1
- English
- Published in 1992
- Published by ISO/IEC
Codes & Standards - Purchase
ISO 10847:1997
Acoustics -- In-situ determination of insertion loss of outdoor noise barriers of all types
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 5843-8:1988
Aerospace -- List of equivalent terms -- Part 8: Aircraft reliability
- Trilingual
- Published in 1988
- Published by ISO
Codes & Standards - Purchase
ISO 603-1:1999
Bonded abrasive products -- Dimensions -- Part 1: Grinding wheels for external cylindrical grinding between centres
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 603-4:1999
Bonded abrasive products -- Dimensions -- Part 4: Grinding wheels for surface grinding/peripheral grinding
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 157:1996
Coal -- Determination of forms of sulfur
- English, French
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 12117:1997
Earth-moving machinery -- Tip-over protection structure (TOPS) for compact excavators -- Laboratory tests and performance requirements
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 3274:1996
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments
- English, French
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 2857:1973
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches -- Manufacturing tolerances on the threaded portion
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 610:1990
High-tensile steel chains (round link) for chain conveyors and coal ploughs
- English, French
- Published in 1990
- Published by ISO
Codes & Standards - Purchase
ISO 4903:1989
Information technology -- Data communication -- 15-pole DTE/DCE interface connector and contact number assignments
- English, French
- Published in 1989
- Published by ISO
Codes & Standards - Purchase
ISO 4902:1989
Information technology -- Data communication -- 37-pole DTE/DCE interface connector and contact number assignments
- English, French
- Published in 1989
- Published by ISO
Codes & Standards - Purchase
ISO 3952-1:1981
Kinematic diagrams -- Graphical symbols
- Trilingual
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 12194:1995
Leaf tobacco -- Determination of strip particle size
- English
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 4374:1990
Liquid flow measurement in open channels -- Round-nose horizontal broad-crested weirs
- English, French
- Published in 1990
- Published by ISO
Codes & Standards - Purchase
ISO 2975-6:1977
Measurement of water flow in closed conduits -- Tracer methods -- Part 6: Transit time method using non-radioactive tracers
- English, French
- Published in 1977
- Published by ISO
Codes & Standards - Purchase
ISO 3419:1981
Non-alloy and alloy steel butt-welding fittings
- English, French
- Published in 1981
- Published by ISO
Codes & Standards - Purchase
ISO 12714:1999
Non-destructive testing -- Acoustic emission inspection -- Secondary calibration of acoustic emission sensors
- English
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 2972:1979
Numerical control of machines -- Symbols
- English, French
- Published in 1979
- Published by ISO
Codes & Standards - Purchase
ISO 7004:2002
Photography -- Industrial radiographic films -- Determination of ISO speed, ISO average gradient and ISO gradients G2 and G4 when exposed to X- and gamma-radiation
- English
- Published in 2002
- Published by ISO
Codes & Standards - Purchase
ISO 228-2:1987
Pipe threads where pressure-tight joints are not made on the threads -- Part 2: Verification by means of limit gauges
- English, French
- Published in 1987
- Published by ISO
Codes & Standards - Purchase
ISO 182-4:1993
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 4: Potentiometric method
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 390:1993
Products in fibre-reinforced cement -- Sampling and inspection
- English, French
- Published in 1993
- Published by ISO
Codes & Standards - Purchase
ISO 1005-1:1994
Railway rolling stock material -- Part 1: Rough-rolled tyres for tractive and trailing stock -- Technical delivery conditions
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 1005-7:1982
Railway rolling stock material -- Part 7: Wheelsets for tractive and trailing stock -- Quality requirements
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 3996:1995
Road vehicles -- Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid
- English, French
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 612:1978
Road vehicles -- Dimensions of motor vehicles and towed vehicles -- Terms and definitions
- English, French
- Published in 1978
- Published by ISO
Codes & Standards - Purchase
ISO 3538:1997
Road vehicles -- Safety glazing materials -- Test methods for optical properties
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 2787:1984
Rotary and percussive pneumatic tools -- Performance tests
- English, French
- Published in 1984
- Published by ISO
Codes & Standards - Purchase
ISO 642:1999
Steel -- Hardenability test by end quenching (Jominy test)
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 477:1982
Textile machinery and accessories -- Cone and cheese winding machines -- Vocabulary
- Trilingual
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 2947:1973
Textiles -- Integrated conversion table for replacing traditional yarn numbers by rounded values in the Tex System
- English, French
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 12576-1:2001
Thermal insulation -- Insulating materials and products for buildings -- Conformity control systems -- Part 1: Factory-made products
- English
- Published in 2001
- Published by ISO
Codes & Standards - Purchase
ISO 12366:2001
Two-wheeled mopeds -- Antilock braking systems (ABS) -- Tests and measurement methods
- English
- Published in 2001
- Published by ISO
Codes & Standards - Purchase
ISO 8669-2:1996
Urine collection bags -- Part 2: Requirements and test methods
- English, French
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 12890:1999
Water quality -- Determination of toxicity to embryos and larvae of freshwater fish -- Semi-static method
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 1684:1975
Wire, bar and tube drawing dies -- Specifications
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 10843:1997
Acoustics -- Methods for the description and physical measurement of single impulses or series of impulses
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 11561:1999
Ageing of thermal insulation materials -- Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 12884:2000
Ambient air -- Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons -- Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
- English, French
- Published in 2000
- Published by ISO
Codes & Standards - Purchase
ISO 11881:1999
Corrosion of metals and alloys -- Exfoliation corrosion testing of aluminium alloys
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 834-1:1999
Fire-resistance tests -- Elements of building construction -- Part 1: General requirements
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 10767-2:1999
Hydraulic fluid power -- Determination of pressure ripple levels generated in systems and components -- Part 2: Simplified method for pumps
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 4412-2:1991
Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 2: Motors
- English, French
- Published in 1991
- Published by ISO
Codes & Standards - Purchase
ISO 1745:1975
Information processing -- Basic mode control procedures for data communication systems
- English, French
- Published in 1975
- Published by ISO
Codes & Standards - Purchase
ISO 12740:1998
Lead sulfide concentrates -- Determination of silver and gold contents -- Fire assay and flame atomic absorption spectrometric method using scorification or cupellation
- English
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 90-2:1997
Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 2: General use containers
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 4463-1:1989
Measurement methods for building -- Setting-out and measurement -- Part 1: Planning and organization, measuring procedures, acceptance criteria
- English, French
- Published in 1989
- Published by ISO
Codes & Standards - Purchase
ISO 6196-8:1998
Micrographics -- Vocabulary -- Part 8: Use
- Bilingual
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 4267-2:1988
Petroleum and liquid petroleum products -- Calculation of oil quantities -- Part 2: Dynamic measurement
- English, French
- Published in 1988
- Published by ISO
Codes & Standards - Purchase
ISO 265-1:1988
Pipes and fittings of plastics materials -- Fittings for domestic and industrial waste pipes -- Basic dimensions: Metric series -- Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
- English, French
- Published in 1988
- Published by ISO
Codes & Standards - Purchase
ISO 1005-6:1994
Railway rolling stock material -- Part 6: Solid wheels for tractive and trailing stock -- Technical delivery conditions
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 4131:1979
Road vehicles -- Dimensional codes for passenger cars
- English, French
- Published in 1979
- Published by ISO
Codes & Standards - Purchase
ISO 5022:1979
Shaped refractory products -- Sampling and acceptance testing
- English, French
- Published in 1979
- Published by ISO
Codes & Standards - Purchase
ISO 676:1995
Spices and condiments -- Botanical nomenclature
- Bilingual
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 1151-6:1982
Terms and symbols for flight dynamics -- Part 6: Aircraft geometry
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 1122-2:1999
Vocabulary of gear terms -- Part 2: Definitions related to worm gear geometry
- Bilingual
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 12460-1:2007
Wood-based panels -- Determination of formaldehyde release -- Part 1: Formaldehyde emission by the 1-cubic-metre chamber method
- English, French
- Published in 2007
- Published by ISO
Codes & Standards - Purchase
ISO 10648-1:1997
Containment enclosures -- Part 1: Design principles
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 12480-1:1997
Cranes -- Safe use -- Part 1: General
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 1151-1:1988
Flight dynamics -- Concepts, quantities and symbols -- Part 1: Aircraft motion relative to the air
- English, French
- Published in 1988
- Published by ISO
Codes & Standards - Purchase
ISO 830:1999
Freight containers -- Vocabulary
- Bilingual
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 11095:1996
Linear calibration using reference materials
- English, French
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO/TS 12927:1999
Lubricants, industrial oils and related products (class L) -- Family M (Metalworking) -- Guidelines for establishing specifications
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO/TS 12928:1999
Lubricants, industrial oils and related products (class L) -- Family R (Products for temporary protection against corrosion) - Guidelines for establishing specifications
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 4369:1979
Measurement of liquid flow in open channels -- Moving-boat method
- English, French
- Published in 1979
- Published by ISO
Codes & Standards - Purchase
ISO 12686:1999
Metallic and other inorganic coatings -- Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 4524-2:2000
Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 2: Mixed flowing gas (MFG) environmental tests
- English, French
- Published in 2000
- Published by ISO
Codes & Standards - Purchase
ISO 11838:1997
Motorcycle and motorcycle-rider kinematics -- Vocabulary
- English
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 2300:1973
Sawn timber of broadleaved species -- Defects -- Terms and definitions
- Trilingual
- Published in 1973
- Published by ISO
Codes & Standards - Purchase
ISO 12491:1997
Statistical methods for quality control of building materials and components
- English
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 999:1996
Information and documentation -- Guidelines for the content, organization and presentation of indexes
- English, French
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 49:1994
Malleable cast iron fittings threaded to ISO 7-1
- English, French
- Published in 1994
- Published by ISO
Codes & Standards - Purchase
ISO 3958:1996
Passenger cars -- Driver hand-control reach
- English, French
- Published in 1996
- Published by ISO
Codes & Standards - Purchase
ISO 3287:1999
Powered industrial trucks -- Symbols for operator controls and other displays
- English, French
- Published in 1999
- Published by ISO
Codes & Standards - Purchase
ISO 1831:1980
Printing specifications for optical character recognition
- English, French
- Published in 1980
- Published by ISO
Codes & Standards - Purchase
ISO 10980:1995
Validation of the strength of reference solutions used for measuring concentrations
- English, French
- Published in 1995
- Published by ISO
Codes & Standards - Purchase
ISO 7176-7:1998
Wheelchairs -- Part 7: Measurement of seating and wheel dimensions
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO/IEC 9314-4:1999
Information technology -- Fibre Distributed Data Interface (FDDI) -- Part 4: Single Mode Fibre Physical Layer Medium Dependent (SMF-PMD)
- English
- Published in 1999
- Published by ISO/IEC
Codes & Standards - Purchase
ISO/IEC 9646-7:1995
Information technology -- Open Systems Interconnection -- Conformance testing methodology and framework -- Part 7: Implementation Conformance Statements
- English
- Published in 1995
- Published by ISO/IEC
Codes & Standards - Purchase
ISO 5725-5:1998
Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 3002-1:1982
Basic quantities in cutting and grinding -- Part 1: Geometry of the active part of cutting tools -- General terms, reference systems, tool and working angles, chip breakers
- English, French
- Published in 1982
- Published by ISO
Codes & Standards - Purchase
ISO 11375:1998
Building construction machinery and equipment -- Terms and definitions
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 11933-2:1997
Components for containment enclosures -- Part 2: Gloves, welded bags, gaiters for remote - handling tongs and for manipulators
- English, French
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 7726:1998
Ergonomics of the thermal environment -- Instruments for measuring physical quantities
- English, French
- Published in 1998
- Published by ISO
Codes & Standards - Purchase
ISO 12640-1:1997
Graphic technology -- Prepress digital data exchange -- Part 1: CMYK standard colour image data (CMYK/SCID)
- English
- Published in 1997
- Published by ISO
Codes & Standards - Purchase
ISO 10821:2005
Industrial sewing machines -- Safety requirements for sewing machines, units and systems
- English, French
- Published in 2005
- Published by ISO
Codes & Standards - Purchase
ISO 5256:1985
Steel pipes and fittings for buried or submerged pipe lines -- External and internal coating by bitumen or coal tar derived materials
- English, French
- Published in 1985
- Published by ISO
Codes & Standards - Purchase
ISO/IEC 9593-1:1990/Amd 1:1995
Information processing systems -- Computer graphics -- Programmer's Hierarchical Interactive Graphics System (PHIGS) language bindings -- Part 1: FORTRAN -- Amendment 1
- English
- Published in 1995
- Published by ISO/IEC
Codes & Standards - Purchase
ISO/IEC 9314-8:1998
Information technology -- Fibre Distributed Data Interface (FDDI) -- Part 8: Media Access Control-2 (MAC-2)
- English
- Published in 1998
- Published by ISO/IEC
Codes & Standards - Purchase
ISO 7348:1992
Glass containers -- Manufacture -- Vocabulary
- Trilingual
- Published in 1992
- Published by ISO
Codes & Standards - Purchase
ISO 4342:1985
Numerical control of machines -- NC processor input -- Basic part program reference language
- English, French
- Published in 1985
- Published by ISO
Codes & Standards - Purchase
ISO 2859-1:1999
Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- English, French
- Published in 1999
- Published by ISO